Products
Welcome to our products page. Our stock of attachments and other items changes daily with more available on order. We are proud to have partnered with several North American manufacturers carrying their outstanding products. Products built in North America come with warranty, are durable, and come in such a wide selection that we are sure to fulfill all of your skid steer, tractor, forklift, and mini excavator, and excavator requirements. Call or email to confirm our current inventory or to order your attachment solution today.
You can see the complete line up of available attachments at:
https://www.bluediamondattachments.com/
https://www.pengoattachments.com/products
http://www.wallensteinequipment.com/nz/en/default.aspx
https://topdogattachments.com/
We are also working with several other suppliers and local craftsman so check back often for unique items.
Pengo has been manufacturing auger and anchor solutions for over 65 years. Their product line features anchor (screw pile) drives to fit any application from hand held units, to skid steers and mini excavators, to excavators. Their products range in torque all the way up to an industry leading 300,000 foot pounds. Couple your drive with the TruLink Torque Monitor System to provide a complete anchor installation attachment meeting and surpassing industry requirements.
Several mounts available for
drives up to 20,000
foot pounds of torque.
Several mounts available for
drives up to 20,000
foot pounds of torque.
The Pengo Earth Auger was
developed over a period of eight
years by the Petersen Engineering
Company for use by its Transmission
Line Construction Department. The
development purpose was to provide
an auger that would bore in ground
conditions formerly considered
impossible, and to combat enormous
maintenance costs that
were amounting over the original
purchase price of the augers during
their lifetime. The result:
The Pengo Earth Auger!
Tree bits are tapered and come
in 24", 36", and 42" diameters.
Aggressor auger bits come in a wide
range of sizes. Double flight
technology removes spoil quickly
and the 5/16" flight thickness
and cast components provide long
term durability.
Step rock bits.
Built to auger through
frozen or very difficult conditions.
Custom auger bits.
Pengo CS-4 auger drive.
High torque 3732' lbs.
Pengo is one of the largest
manufacturers of augers and related
components for over 65 years.
You won't find a better drive
for your skid steer or excavator.
Many other options are
available.
Pengo CS-3 Auger drive for skid
steer and mini excavators.
3226' lbs torque.
Notice the heavy duty mount,
the long hoses, the hose
holder to keep from pinch
points. Durability and attention to
detail makes Pengo a premium
manufacturer of auger and anchor
drives and associated equipment.
Notice the extremely heavy duty
construction of the Pengo
Auger drive and mounting
system.
Auger bits 6" to 36" in stock
2” hex drive
Adapters from 2 9/16” and 2"
round to 2” hex.
Extensions 2', 4', and 6' are
available.
Pengo’s patented BoRH
(Bolt on Rock Head) provides
the ultimate solution for all your
drilling applications.
Designed to convert a standard
Aggressor® Dirt Auger
or the heavy duty TriMAX Auger
into a rock auger, the BORH®
eliminates the need for
an additional and dedicated
Rock Auger. The BORH®
kit contains our boring head, pilot bit,
wear caps, bullet-style carbide teeth
and all hardware needed to
complete the installation. Featuring
innovative wear caps
and enlarged shoulders on the teeth
for increased wear,
the BoRH® system provides the
ultimate solution across a
wide variety of soil conditions.
To install the Bolt on Rock Head
simply remove the pilot bit
assembly and the teeth
from your Pengo auger
then bolt on the rock head.
Bolt on Rock Head testing
on April 6, 2018.
We drilled through the frozen
gravel driveway.
The Bolt on Rock Head
performed well showing
no wear on the carbide
tips. Ideally this BoRH is
more suited for drilling
very hard surfaces.
The Pengo Earth Auger was
developed over a period of eight
years by the Petersen Engineering
Company for use by its Transmission
Line Construction Department. The
development purpose was to provide
an auger that would bore in ground
conditions formerly considered
impossible, and to combat enormous
maintenance costs that
were amounting over the original
purchase price of the augers during
their lifetime. The result:
The Pengo Earth Auger!
Tree bits are tapered and come
in 24", 36", and 42" diameters.
Aggressor auger bits come in a wide
range of sizes. Double flight
technology removes spoil quickly
and the 5/16" flight thickness
and cast components provide long
term durability.
Step rock bits.
Built to auger through
frozen or very difficult conditions.
Custom auger bits.
Pengo CS-4 auger drive.
High torque 3732' lbs.
Pengo is one of the largest
manufacturers of augers and related
components for over 65 years.
You won't find a better drive
for your skid steer or excavator.
Many other options are
available.
Pengo CS-3 Auger drive for skid
steer and mini excavators.
3226' lbs torque.
Notice the heavy duty mount,
the long hoses, the hose
holder to keep from pinch
points. Durability and attention to
detail makes Pengo a premium
manufacturer of auger and anchor
drives and associated equipment.
Notice the extremely heavy duty
construction of the Pengo
Auger drive and mounting
system.
Auger bits 6" to 36" in stock
2” hex drive
Adapters from 2 9/16” and 2"
round to 2” hex.
Extensions 2', 4', and 6' are
available.
Pengo’s patented BoRH
(Bolt on Rock Head) provides
the ultimate solution for all your
drilling applications.
Designed to convert a standard
Aggressor® Dirt Auger
or the heavy duty TriMAX Auger
into a rock auger, the BORH®
eliminates the need for
an additional and dedicated
Rock Auger. The BORH®
kit contains our boring head, pilot bit,
wear caps, bullet-style carbide teeth
and all hardware needed to
complete the installation. Featuring
innovative wear caps
and enlarged shoulders on the teeth
for increased wear,
the BoRH® system provides the
ultimate solution across a
wide variety of soil conditions.
To install the Bolt on Rock Head
simply remove the pilot bit
assembly and the teeth
from your Pengo auger
then bolt on the rock head.
Bolt on Rock Head testing
on April 6, 2018.
We drilled through the frozen
gravel driveway.
The Bolt on Rock Head
performed well showing
no wear on the carbide
tips. Ideally this BoRH is
more suited for drilling
very hard surfaces.
96” Hydraulic Angle Snow Blade
for Skid Steer
Snow blade built extremely tough,
must be seen
Change the angle to either direction
with hydraulics
Comes with trip springs that can be
locked out for dirt moving
Oscillating blade follows the contour
of the ground and can be locked out
for grading or scraping
Compared to a snow bucket, a blade
can clear roadways or large areas
fast as it can wing the snow to the
side providing unlimited capacity
84" hydraulic angled
blade.
108" snow wolf used
blade.
96” Hydraulic Angle Snow Blade
for Skid Steer
Snow blade built extremely tough,
must be seen
Change the angle to either direction
with hydraulics
Comes with trip springs that can be
locked out for dirt moving
Oscillating blade follows the contour
of the ground and can be locked out
for grading or scraping
Compared to a snow bucket, a blade
can clear roadways or large areas
fast as it can wing the snow to the
side providing unlimited capacity
84" hydraulic angled
blade.
108" snow wolf used
blade.
Extreme Duty Open Front Brush Cutter 72”
Standard Flow.
Click image to open descriptive page.
Extreme Duty 60" Closed Front Brush Cutter
Standard Flow
Blue Diamond
Extreme Duty Open Front Brush Cutter 72”
Standard Flow.
Click image to open descriptive page.
Extreme Duty 60" Closed Front Brush Cutter
Standard Flow
Blue Diamond
Regular and extra large snow
buckets. Heavy duty with
1/4" steel and 8" bolt on cutting
edge. Can be used for any
light material.
Custom snow and debris bucket.
Shown with 78 soil bucket for scale.
96" wide, 36" tall, 52" long
Custom logo cut in to the back.
Massive snow bucket
72" toothed bucket
72" smooth bucket
84" heavy duty bucket
78" rock bucket
78" rock bucket
78" smooth bucket
Stump transplant bucket
Regular and extra large snow
buckets. Heavy duty with
1/4" steel and 8" bolt on cutting
edge. Can be used for any
light material.
Custom snow and debris bucket.
Shown with 78 soil bucket for scale.
96" wide, 36" tall, 52" long
Custom logo cut in to the back.
Massive snow bucket
72" toothed bucket
72" smooth bucket
84" heavy duty bucket
78" rock bucket
78" rock bucket
78" smooth bucket
Stump transplant bucket
This was my grandad's dozer. We sold it but had to leave it up on the website.
1954 D17A Dozer
Undercarriage 90%
Ready to work
1954 D17A Dozer
Undercarriage 90%
Ready to work
Hay grapple bucket. 84" heavy duty
bucket with teeth.
Can easily handle a large round bale.
Hay grapple bucket. 84" heavy duty
bucket with teeth.
Can easily handle a large round bale.
Heavy duty 78" bucket with bolt on
cutting edge.
Double grapple can hold odd sized
items closing independently.
Heavy duty 78" bucket with bolt on
cutting edge.
Double grapple can hold odd sized
items closing independently.
Heavy duty 78" bucket with teeth.
Single large opening grapple
great for silage, manure, firewood, or
anything you need to pick up.
Heavy duty 78" bucket with teeth.
Single large opening grapple
great for silage, manure, firewood, or
anything you need to pick up.
48” hay spear with stabilizers
3500 lb capacity very tough for long
lasting durability
Move round and square bales
Stabilizers are removable
Bolt on back rack available
Hay spear with 48” tines
Each tine can hold 3500 lbs,
extremely tough for long lasting
durability
Move round and square bales
Can be used for pallets
Bolt on rack is available
48” hay spear with stabilizers
3500 lb capacity very tough for long
lasting durability
Move round and square bales
Stabilizers are removable
Bolt on back rack available
Hay spear with 48” tines
Each tine can hold 3500 lbs,
extremely tough for long lasting
durability
Move round and square bales
Can be used for pallets
Bolt on rack is available
Quick Attach Rage disc mulcher for sale. 180 hours use. It will shred a 7" x 40' poplar tree in seconds. Eats brush faster than your lawnmower through short grass.
Can be seen working, come by for a demo.
Walk through pallet forks
Heavy duty 5000 lb capacity
Tines are 48” long
Many options available including
mat grapples, grapple forks, hydraulic
adjusting forks, lighter duty designs,
and many other configurations, call
for more details
Made in Canada pallet forks
Pallet forks and bale spear combo
Walk through pallet forks
Heavy duty 5000 lb capacity
Tines are 48” long
Many options available including
mat grapples, grapple forks, hydraulic
adjusting forks, lighter duty designs,
and many other configurations, call
for more details
Made in Canada pallet forks
Pallet forks and bale spear combo
Root and tree grapple.
A must have item for handling trees, logs, and roots.
Available in various widths to suit your machine and needs.
Requires only standard flow auxiliary hydraulics.
Root and tree grapple.
A must have item for handling trees, logs, and roots.
Available in various widths to suit your machine and needs.
Requires only standard flow auxiliary hydraulics.
Hydraulic tillers available in 60", 72", and 84" widths.
8’ wide snow pusher
Bolt on replaceable wear shoes
Rubber cutting edge
Increase the productivity of your skid steer with
the capability to push large volumes of snow and
not have to dump at the end
Back drag options available, this lets you get up
tight to buildings and fences.
